Silicone screen printing is widely used in glove manufacturing for grip and durability. However, delamination-where the silicone layer separates from the substrate or between layers-remains a common and costly issue.
This problem rarely comes from a single cause. Instead, it is typically the result of material mismatch, insufficient ink penetration, or improper curing conditions. Understanding these factors is key to achieving stable adhesion.
What Causes Silicone Ink Delamination?
1. Substrate Compatibility
Many glove materials such as polyester and nylon have low surface energy, making it difficult for silicone to bond effectively. Surface contaminants like oils or water-repellent finishes further reduce adhesion.
2. Silicone Material & Mixing
Using non-specialized silicone or incorrect mixing ratios can lead to incomplete crosslinking, reducing both adhesion and internal strength.
3. Printing Process (Mesh & Squeegee)
If the mesh is too fine or the squeegee pressure is insufficient, the silicone will sit on the surface instead of penetrating the fabric, resulting in weak mechanical bonding.
4. Layering Control
In multi-layer printing, poor timing or contamination between layers can cause interlayer separation, especially in thick or 3D prints.
5. Curing Conditions
Improper curing is one of the main causes:
Low temperature → under-curing
Uneven heating → inconsistent structure
This leads to weak bonding and eventual peeling.
Conclusion
Silicone delamination on gloves is a process-related issue rather than a single defect. It involves the interaction of substrate properties, silicone formulation, printing technique, and curing control.
By optimizing each step, manufacturers can significantly improve adhesion performance and ensure long-term durability.
