Clear Matte Silicone Top Coat for Textile Screen Printing
Clear Matte Silicone Top Coat is specially developed for creating smooth, transparent and non-reflective surface finishes on textile silicone prints. It is normally applied as the final coating layer over high-density, colored, rounded or anti-slip silicone patterns.
The product produces a clean matte appearance while retaining the flexibility, elasticity and dimensional details of the underlying silicone print. It is suitable for garments, pants, socks, gloves, webbing, elastic bands and other compatible textile products.
Available models include:
XG-866M / XG-866M-6+ / XG-866M-6Y / XG-136M-1 / XG-866M-6
Different models are available for heat-curing and self-drying production systems.
Heat-Cure Matte Silicone System
The heat-cure series is recommended for printing workshops equipped with platen dryers, flash-curing machines or ovens.
Main Materials
| Component | Product Model | Recommended Addition |
|---|---|---|
| Matte Silicone | XG-866M / XG-866M-6+ / XG-866M-6Y | Main material |
| Catalyst | XG-866B-2 | 2–3% |
Mixing Instructions
Weigh the matte silicone accurately.
Add 2–3% XG-866B-2 catalyst.
Mix thoroughly until the catalyst is completely dispersed.
Avoid introducing excessive air during mixing.
Use the prepared material within its recommended working time.
The catalyst dosage may be adjusted within the recommended range according to the workshop temperature, printing speed and required drying rate. Excess catalyst may shorten the working time, while insufficient catalyst may result in incomplete curing.
Self-Drying Matte Silicone System
The self-drying series is suitable for workshops without continuous heating equipment and for applications that require room-temperature curing.
Main Materials
| Component | Product Model | Recommended Addition |
|---|---|---|
| Matte Silicone | XG-136M-1 / XG-866M-6 | Main material |
| Fast-Drying Catalyst | XG-MB-1 | 10% |
| Medium-Drying Catalyst | XG-ZB-1 | 10% |
| Slow-Drying Catalyst | XG-KB-1 | 10% |
| Extra-Slow-Drying Catalyst | XG-TMB-1 | 10% |
Select the catalyst according to the required printing speed, workshop temperature and operating time. Mix the matte silicone and catalyst at approximately 10:1 by weight.
For XG-866M-6, confirm the selected catalyst and curing method before production, as different application configurations may require different additive systems.
Textile Screen Printing Process
Clear Matte Silicone Top Coat is normally applied as the final surface layer.
Step 1: Substrate Preparation
Make sure the fabric and previously printed silicone layers are clean, dry and free from dust, oil or release agents.
For nylon, polyester, waterproof fabric or other difficult substrates, a suitable primer or cross-linking layer may be required before printing the main silicone structure.
Step 2: Base or High-Density Printing
Print the required transparent, colored or high-density silicone layers according to the design.
Each layer should be flash-dried before the next layer is printed. Additional printing passes may be used to build the required height, shape or three-dimensional effect.
Step 3: Color Printing
When a colored design is required, mix the compatible silicone ink with the selected pigment paste and catalyst.
Print repeatedly until the desired color coverage and thickness are achieved. Make sure every layer is surface-dry before continuing.
Step 4: Matte Top Coating
Mix the selected matte silicone with its corresponding catalyst.
Print the matte silicone evenly over the finished silicone pattern. The matte coating must normally be the last printed layer.
For consistent coverage and a uniform non-reflective surface, print the matte top coat two times or more, depending on the design, screen mesh, coating thickness and required hand feel.
Step 5: Final Curing
After all layers have been completed, cure the printed product according to the selected silicone system.
The reference printing process similarly recommends flash-drying each layer before applying the next layer and completing final curing after the surface coating has been printed. (Huizhou Yirun Silicone Co., Ltd.)
Clear Matte Silicone Top Coat for Textile Screen Printing Times
The recommended printing frequency for the matte top coat is:
Standard matte coating: two printing passes
Higher surface coverage: two or more printing passes
Special textures or deep patterns: adjust according to the sample
Thin decorative coating: determine through production testing
The actual number of passes depends on screen mesh, stencil thickness, silicone viscosity, squeegee pressure and the surface structure of the underlying print.
Drying and Baking Requirements
Platen Dryer or Flash-Curing Machine
After each printing pass, move the printed area back and forth under the platen dryer until the surface is dry enough for the next layer.
Do not overheat the silicone between printing passes. Excessive intermediate heating may reduce interlayer adhesion.
Oven Curing
After printing is complete, place the finished product in an oven for final curing.
The exact curing temperature and time depend on:
Product model
Catalyst system
Fabric type
Printing thickness
Number of layers
Oven efficiency
Production speed
Please contact our technical team or refer to the corresponding process video and technical data sheet for the recommended temperature and curing time.
Available Printing Effects
Clear Matte Silicone Top Coat can be used to create:
Transparent matte surfaces
Full matte surfaces
Skin-feel matte finishes
Soft-touch surface effects
Smooth anti-glare coatings
Matte high-density logos
Matte three-dimensional patterns
Matte anti-slip textures
Matte coatings over colored silicone
Decorative flat or raised surface effects
Main Function
The main function of Clear Matte Silicone Top Coat is to provide a uniform matte surface over silicone-printed designs.
It reduces surface reflection, improves the visual consistency of the pattern and creates a smoother, softer surface. The coating can also help protect the underlying printed structure from surface abrasion and repeated handling.
Applications
Clear Matte Silicone Top Coat is suitable for:
T-shirts and garments
Sportswear and activewear
Pants and leggings
Underwear and yoga wear
Socks and gloves
Webbing and elastic bands
Textile labels
Fabric accessories
Rope and shoelace applications
Compatible shoe-upper materials
Waterproof and coated fabrics after suitable pretreatment
Design Options
The matte silicone coating can be applied to different decorative and functional designs, including:
Brand logos
Lettering and trademarks
Decorative patterns
Geometric graphics
Multicolor designs
Raised three-dimensional graphics
Anti-slip dots
Anti-slip lines
Grip patterns
Functional textile textures
Important Processing Notes
Use the correct catalyst for the selected matte silicone model.
Measure all components by weight.
Mix thoroughly before printing.
Test adhesion before mass production.
Flash-dry every layer before printing the next layer.
Apply the matte silicone as the final coating layer.
Avoid contamination from incompatible chemicals.
Confirm curing conditions according to the fabric and printing thickness.
Conduct washing, stretching and abrasion tests before bulk production.
Refer to the latest technical data sheet when controlling viscosity, hardness, working time and curing parameters.
Clear Matte Silicone Top Coat provides a practical solution for creating soft, durable and non-reflective surfaces on textile silicone prints. With both heat-cure and self-drying systems available, manufacturers can select the appropriate product according to their equipment, production speed and required matte effect.
Hot Tags: clear matte silicone top coat for textile screen printing, China, suppliers, manufacturers, factory, wholesale, price, pricelist, free sample
