Flocked Silicone Logos for Sportswear and Activewear
Sportswear brands may look for a distinctive logo finish beyond a conventional smooth print. Flocked silicone printing creates a soft, fiber-covered surface on selected graphics. XG-10000A is the main silicone component in a heat-curing system that can be tested on compatible sportswear fabrics.
For the product system, mixing ratio and core process requirements, see Flocking Silicone Ink for Textile Screen Printing.
Logo Placement on Sportswear
Possible locations include chest marks, sleeve logos, upper-back graphics and decorative panels. Review placement on the finished garment because seams, body shape and fabric stretch can affect the final appearance.
Plan Artwork for a Clear Flocked Finish
Bold symbols, lettering and simple logos are useful starting points. Check fine lines and small negative spaces at final size. Approve the graphic only after reviewing a flocked sample on the actual fabric.
Mixing XG-10000A and XG-10000B
Use a 1:1 ratio of XG-10000A main silicone to XG-10000B auxiliary agent. The listed color-paste options are white, black, red, yellow and blue; the exact dosage must be confirmed with the supplier.
Production Sequence
Print ordinary silicone layers first if the design requires them. The supplied process calls for 2–3 passes overall, with the final two passes using the flocking mixture. Keep the final pass wet and apply flock directly after printing.
Fabric Stretch and Wear Considerations
Sportswear fabrics differ in stretch, knit construction and surface finish. Check the printed area under representative use conditions and test any required washing, rubbing or stretch durability. Do not assume all fabrics or garment constructions will perform identically.
Pre-Production Quality Checks
Review flock coverage, logo definition, adhesion and color consistency. Confirm approved post-flocking curing settings and keep an approved sample as the production reference.
Related Reading
Product details: Flocking Silicone Ink for Textile Screen Printing. Application example: How to Print Flocked Silicone Logos on T-Shirts and Sweatshirts. Process guide: How to Print Heat-Curing Flocking Silicone on Textiles.
FAQ
Is flocked silicone the same as smooth silicone printing?
No. Flocking adds fibers to the final wet silicone layer, creating a fuzzy surface rather than leaving a smooth silicone surface exposed.
Can it be used on every sportswear fabric?
Not automatically. Test the actual fabric and confirm compatibility before bulk production.
Are curing settings available?
The supplied notes do not include temperature or time. Obtain approved post-flocking curing settings from the supplier.