Silica gel is another new process used in the garment industry - silica gel heat transfer printing, also known as heat transfer printing silica gel. Silica gel, transfer glue, and hot melt glue are first screen printed on high-temperature release film, and then "hot stamping machine" is used to iron the surface of cloth and other carriers. Silica gel and heat transfer intermediate glue are sealed separately by a and B. Store at room temperature for 3 months. What are the operating procedures for using heat transfer silicone?
1. Prepare the silica gel according to 10:1, add the color paste according to 8-10%, mix it well, print it on the transfer film, and bake it until it is dry until the desired effect, thickness, color, etc. are achieved.
2. Mix the silicone heat transfer coating glue 1:1 evenly, print it on the silicone surface, cut it twice at a time, wait for 5 minutes, and bake it dry. Reprint twice, wait for 5 minutes, bake until the surface is dry, and then print the hot melt adhesive (the hot melt adhesive should be diluted with toluene or cyclohexanone).
3. Remove the film, put it into the oven, bake it at 80 ° C for 30 minutes, bake it at 150 ° C for 30 minutes, take it out and cool it, then transfer it. Press ironing at 150 ℃ for 6-8 seconds.