Material
1.Round silicone XG-866A-2Y
2.Silicone catalyst XG-866B-2
3.Silicone pigment rose red XG-300
4.Silicone thinner XG-128AH
5.Screen 48T mesh
Printing process
1.Use 866A-2Y with 2% 866B-2,10% XG-128AH to print 4-6 times(two strikes each time,130℃ bake ink to dry then go on)
2.Use 866A-2Y with 2% 866B-2,20% 128AH,10% rose red pigment XG-300 to pulling print 2 times(two strikes each time,130℃ bake ink to dry then go on)
3.Use 866A-2Y with 2% 866B-2,30% 128AH,10% rose red pigment XG-300 to pulling print 2 times(two strikes each time,130℃ bake ink to dry)